Click on item to jump to product information and ordering or scroll page for our full product line

Compact 279-S
$139.95

Top Draw 2912-S
$166.00

Desk Mate 2597-S
$173.00

Hide-Away 3912-SH
$259.00

Quick Vault 41214-S
$250.00

Narcotics Security Box
with or without Audit
Trail Software. 6912-SE
Ask for quote

Rifle Case 31242-SA
$329

Closet Vault 51653-SA
$520

Questions

  Shipping charges to Hawaii will be at least $65 and possibly much more on heavier products because we had to discontinue ground shipments to Hawaii because the trucks kept sinking.  Email support@sellcom.com for a shipping quote to Hawaii.

Note: Overnight shipping on these products, because of their weight will be substantially higher than the shopping cart calculated overnight shipping charge.

Just call

800-SELLCOM
(800-735-5266)

Have a question?
 

  V-Line Compact 279-S

Inner dimensions:  8½" x 6½" x 1½”
Outer dimensions? 9½" x 7¼" x 2"
 

Five button mechanical lock for quick access with 1081 possible combinations.
Top opening security case with classic slim design.
3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
Elongated hole in the back allows a cable or pad lock to be used to secure the case to most any surface enabling the case to be transportable.
Foam lining on top and bottom.
Sturdy fabricated steel construction with pry resistant clamshell design.
Available in textured semi-gloss black powder coated finish.
Continuous hinge is welded on one end to prevent pin removal.
Accented with gold tone pinstripe and logo.
5 lbs

This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder.

  V-Line Top Draw 2912-S

Inner dimensions 11¾" x 8¾"
Outer dimensions 12" x 9" x 2½"
 

Five button mechanical lock for quick access with 1081 possible combinations.
Top opening security case with classic slim design.
3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
Prepunched holes for easy installation.
Lock bolts directly through the inner frame of case to prevent prying.
Foam lining on top and bottom protects and holds contents securely in place.
Sturdy fabricated steel construction with pry resistant clamshell design.
Available in textured semi-gloss black powder coated finish.
Continuous hinge is welded on one end to prevent pin removal.
Accented with gold tone pinstripe and logo design. Custom logos and colors are available upon request.
Model 2912-S can be mounted directly to any surface or attached with the optional Mounting Bracket for easy portability.

This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder.

  Desk Mate 2597-S

Inside dimensions 6½" x 8¼" x 1¾”
Outside dimensions door closed:  7½" x 10½" x 2½"
Outside dimensions with door open: 7½" x 11¾" x 4"
 

Designed to install under most surfaces with included Quick Release Mounting Bracket (MBDM).
Front opening case door drops down for easy access.
Desk Mate may also be installed sideways with the top bolted to the side of a surface and the door on the top.
Five button mechanical lock for quick access with 1081 possible combinations, easy to set a personalize code.
No keys to lose or batteries to change.
Felt Lined Tray (TDM) is included.  An additional TDM can also be ordered separately.
One Quick Release Mounting Bracket (MBDM) is included with each Desk Mate for easy installation under most surfaces.
Additional Quick Release Mounting Brackets may be ordered to allow the case to be used in more than one location.
3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
The door is recessed for added pry protection.
Anti-Pry brackets in the interior provide additional strength and security.
Available in textured semi-gloss black powder coated finish.
Continuous hinge is welded on one end to prevent pin removal.
An optional Universal Mounting Bracket (UBDM) is available to enable the case to be installed on top of most surfaces.
Accented with gold tone pinstripe and logo design.

This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder.

  Hide-Away 3912-SH

Inside dimensions: 11¾" x 7¾" x 2¼"
Outside dimensions:
    Door closed: 12¾" x 9¾" x 3½"
    Door open:  12¾" x 11¾" x 4¾"
 

Front opening security case features slide out felt lined drawer for easy access to contents.
One Quick Release Mounting Bracket (MB2912) is included with each Hide-Away for easy installation under most surfaces.
Additional Quick Release Mounting Brackets may be ordered to allow the case to be used in more than one location.
3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
Five button mechanical lock for quick access with 1081 possible combinations, easy to set a personalize code.
No keys to lose or batteries to change.
The door is recessed for added pry protection.
Anti-Pry brackets in the interior provide additional strength and security.
Continuous hinge is welded on one end to prevent pin removal.
An optional Universal Mounting Bracket (UBHA) is available to enable the case to be installed on top of most surfaces.
Available in textured semi-gloss black powder coated finish.
Accented with gold tone pinstripe and logo design.

This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder.

  New QuickVault 41214-S Wall Safe

Inside dimensions: 13" x 11¼" x 2¼"
Outside dimensions:    14" x 12" x 3½"
Outside dimensions including frame: 17" x 15" x 3½"

 

Designed to install between the wall studs
Case mounts flush with the wall surface.
One adjustable felt lined shelf included. Additional shelves available.
Comes with one adjustable shelf and can accommodate 3 shelves
Five button mechanical lock for quick access with 1081 possible combinations.
3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
Pre-punched holes for easy installation.
Lock bolts directly through the inner frame of case to prevent prying.
Felt lining in back, bottom and sides protects contents.
Sturdy fabricated steel construction with pry resistant clamshell design.
Available in textured semi-gloss ivory powder coated finish.
Continuous hinge is welded on one end to prevent pin removal.
Color - Ivory.  Accented with gold tone pinstripe and logo design.

Installation Instructions

This is a California-approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued thereunder

 Narcotics Security Box 6912-SE

The Narcotics Security Box provides the ability to control access and creates an electronic log of opening events tied to user ID for audit purposes. With the Unicon™ CL20 Lock incorporated in the V-Line Narcotics Security Box controlled substances are secure until accessed by assigned personnel using their personal ID combination. Up to 125 different user ID’s can be loaded on a single lock. Regulatory compliance is made easier with the Unicon™  CL20 Lock.

Inside dimensions: 12 ¼” W x 5 ¾” H x 7” D.

Outside dimensions 12 ½” W x 6” H x 9 ¾” D

Unicon lock can be used without software and codes can be set for up to 125 users.
To be able track and set up audit trails for one or multiple boxes, use the Unicon™ Audit Trail Software, sold separately below.

Other images: 

The Mounting bracket can be used above or below the box and is included.
(Installation hardware is not included, as it depends on the surface as to what kind will be needed.)
 The Merritt bag is not included but shown here as a size reference..   

Click here for other features of the Unicon Lock
Click here for 8 page PDF user manual for Unicon Lock   

  Shotgun /Security Case 3842-SA

Inside dimensions: 40½"x 7”x 3"
Outside dimensions: 42"x 8"x 3½"

Shotgun Cases are designed to be mounted directly to your wall or floor. 
Great for use at home, office, RV or boat.
Top opening case.
Can be easily hidden in a closet or behind a door for best concealment.
Five button lock is mechanical and features a programmable combination.
Two tubular key locks have been added to the top and bottom for additional security when quick access is not required.
May be installed vertically or horizontally.
Holes are pre-punched on back for easy installation on top of most surfaces.
Large enough to accommodate most long guns.
Foam lined back, top, and bottom.
Velcro strap holds barrel in place and provides quick release.
Available in black only.
Does not meet the California standards

  Rifle /Security Case 31242-SA

Inner dimensions: 40½" x 11” x 3"
Outer dimensions: 42" x 12" x 3½"
 

Product Features:

Shotgun Cases are designed to be mounted directly to your wall or floor. 
Great for use at home, office, RV or boat.
Top opening case.
Can be easily hidden in a closet or behind a door for best concealment.
Five button lock is mechanical and features a programmable combination.
Two tubular key locks have been added to the top and bottom for additional security when quick access is not required.
May be installed vertically or horizontally.
Holes are pre-punched on back for easy installation on top of most surfaces.
Large enough to accommodate most long guns.
Foam lined back, top, and bottom.
Velcro strap holds barrel in place and provides quick release.
Available in black only.
Does not meet the California standards

  Closet Vault 51653-SA

Dimensions:
53" x 16 ¾" x 5 ¾" outside
50" x 13 ½" x 4 ¾" inside

V-Line’s Closet Vault is designed to install in between the wall studs
The door and frame protrudes 2” to provide extra internal depth.
The Closet Vault is large enough to accommodate small household valuables, such as jewelry, cash, cameras, and firearms without taking up floor space.
The Closet Vault can be easily hidden in a closet or behind a door for best concealment.
The door fits flush into the frame of the Closet Vault to protect against a prying attack.
The push button lock is mechanical and features a programmable combination.
Two tubular key locks have been added to the top and bottom for additional security when quick access is not required.
Shelving accessories are available to customize the Closet Vault to best meet individual needs.
Does not meet the California standards